On Wednesday, a few friends and I had a craft night, and I made an easy, no-sew tree skirt. The project took me a total of about 2.5 hours, not including the time at the craft store. I used the old “tie-the-strips-of-fleece-together” method, and it worked well. See below for instructions.
- 1.75 yards of two different fleece fabrics – I bought one solid red fleece fabric and one patterned red and white fabric. Note that you need to ensure that your fabrics will be big enough to make a circle 60 inches in diameter. You may want to tell the person cutting your fabric that you’ll be making a tree skirt this size.
- Tape measure
- Pen or pencil
- Straight pins
Instructions for this easy no-sew tree skirt
- Find the center of the fabric and mark it with a pen. To do this, fold the fabric in half the “tall way” so that the fabric is folded to be tall and skinny. Then, measure the fabric along the tall edge with your tape measure and make a mark at the center. Then unfold the fabric.
- Using the center you just marked as a guide, draw a large circle on your fabric. To do this, tie a piece of string to your pen (or pencil) and then cut the sting to be 30 inches long. Hold the end of your string at the center you marked in the previous step, extend the string out fully, and draw your circle by slowly moving the pen around the center in a circle. Note: Your resulting circle will be 60 inches in diameter, which will seem very large. It will be smaller when you’re done.
- Lay your solid circle on top of the patterned fleece, with the pattern facing down. Then use the solid circle as a guide to cut a circle from the patterned fleece. After this, do not separate the circles.
- Using your same pen and string, cut the 30 inch string down to 5 inches and measure a small circle around the center in the same process. Then cut out the small circle. It will be 10 inches in diameter.
- Cut a slit through both fabrics from the outer edge straight to the small circle. Using the straight pins, pin the fabric together along both sides of the slit.
- With the circles still together, cut 1 inch wide strips through both piece of fabric. The strips should be about 6 inches long.
- Once you’ve cut these strips all around the circle, knot one patterned strip together with one solid strip. Do this all the way around the tree skirt.
- Then take out your straight pins because you’re done!
Note: If you’d like, you can sew the edges along the slit and around the smaller circle. However it’s not necessary. The solid fabric and the pattern fabric will naturally cling together, and if they get a little out of alignment along the small circle and along the slit, you can just line them back up.
Finally, here’s the first ever picture on my blog of me in the process of making something! Thanks to my friend Christina for taking this! Can’t believe it took so long to post an “action shot!”